Minimum Order Quantity | 1 Piece |
Usage/Application | Zinc Electroplatting |
Material | Mild Steel |
Plating Style | ZINC |
Control System | Automatic |
Moving System | Automatic |
Outer Body | Fabrication |
Industries Served | aluminum, nickel, and bismuth |
Electroplating process starts with carefully cleaning the fastener surface in alkaline detergent type solutions. It is then treated with acid, in order to remove any rust or surface scales. Thorough cleanliness is essential as the molecular layers of oil or rust can prevent adhension of the coating to the metal surface.
Electroplating is done by the process of electro deposition. The fasteners are dipped in a chemical bath containing dissolved zinc. When direct current is applied, the zinc metal at the anode begins to dissolve, and the free metalions reach the cathode to form a thin layer of coating on the fastener. The thickness of zinc plating depends on the time spent in the plating bath, the amount of electric current, and the chemical composition of bath.
AdvantagesElectroplating results in smooth, shiny & drip-free surface - preferable for aesthetic reasons. Because it's thin - It doesn't interfere with fastener threads. Also has a significantly lower cost.
Hydrogen EmbrittlementDuring acid cleaning and in the electroplating process, atomic hydrogen produced can diffuse into the steel and embrittle the structure of fastener. The electroplated coating traps the hydrogen inside the fasteners, which can migrate to areas of high stress and cause small microcracks & ultimately lead to brittle failure, unless they are baked soon after plating to drive the hydrogen out. High strength fasteners are particularly prone to hydrogen embrittlement because greater the strength (or hardness) of the alloy fasteners, the greater the susceptibility to hydrogen damage failure.
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M251 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 30 V DC |
Communication Port | DHCP Client,Modbus,Ethernet |
Usage/Application | PLC |
Modicon M251 logic controller- your choice for modular and distributed architectures, that connect everything!
The Modicon M251 with CANopen or Modbus TCP let you easily connect to SCADA, MES, ERP by standard Ethernet cables and even via Wi-Fi. Boost your machine’s performance with data transfer via SD Card, embedded web server and more. Get unlimited access to your machine via Ethernet - everywhere and any time and simplify maintenance with any mobile device through visualization pages designed directly inside SoMachine and stored in the PLC’s web server.
The Modicon M251 logic controller is a MachineStruxure controller. The NEXT generation of MachineStruxure™ from Schneider Electric is an intuitive solution for machine automation with all the features and functions you need to build machines that will improve your bottom line. From design and development, to commissioning and maintenance, MachineStruxure is a complete machine building solution with benefits all through the machine life cycle.
Models&Ratings
TM251MESC
TM251MESE
Minimum Order Quantity | 1 Piece |
Brand | PANASONIC |
Torque | 1.2 |
Output Power | 200W |
Input Voltage | 24VDC |
Input Phase | 1 - Phase |
Model Name/Number | MADLN15BE |
Minimum Order Quantity | 1 Piece |
Usage/Application | Machine |
Current | 0.5 A |
Brand | Panasonic |
Voltage | 24 V DC |
Mounting Type | Din Rail |
Display Type | LED |
No Of Inputs | 16 |
Model Name/Number | AFP0RT32MT |
Item | Specifications |
---|---|
Rated voltage | 24 V DC |
Operating voltage range | 20.4 to 28.8 V DC |
Allowed momentary power off time | 10 ms (20.4 V DC or higher) |
Operating temperature | 0 to +55 ℃ 32 to +131 ℉ |
Storage temperature | -40 to +70 ℃ -40 to +158 ℉ (-20 ℃ to +70 ℃ -4 to +158 ℉ for T32 only) |
Operating humidity | 10 to 95% RH (at 25 ℃ 77 ℉, no condensation) |
Storage humidity | 10 to 95% RH (at 25 ℃ 77 ℉, no condensation) |
Breakdown voltage (Detection current: 5 mA) | Input terminals - output terminals, Output terminals - power and functional ground terminals --- Transistor output : 500 V AC for 1 minute (Relay output : 1,500 V AC for 1 minute) / Input terminals - power and functional ground terminals, Functional ground terminal - power terminal --- Transistor output : 500 V AC for 1 minute (Relay output : 500 V AC for 1 minute) / Output terminals - output terminals (different common terminals) --- Relay output : 1,500 V AC for 1 minute |
Insulation resistance (Test voltage: 500 V DC) | Input terminals - output terminals, input terminals - power and functional ground terminals, output terminals - power and functional ground terminals, functional ground terminal - power terminal --- Transistor output : 100 MΩ minimum (relay output : 100 MΩ minimum) / Output terminals - output terminals (different common terminals) --- Relay output : 100 MΩ minimum |
Vibration resistance | 5 to 9 Hz, single amplitude of 3.5 mm, 1 sweep/min; 9 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min; for 10 min each in X, Y, and Z directions |
Shock resistance | 147 m/s2 or more , 4 times each in X, Y, and Z directions |
Noise resistance | 1,000 V (p-p) with pulse widths 50 ns and 1 μs (using a noise simulator)(Power supply terminal) |
Operating condition | Free from corrosive gasses and excessive dust |
Minimum Order Quantity | 1 Piece |
Phase | Three Phase |
Output Power | 400 W |
Body Material | Metal |
Input Voltage | 200V |
Model Name/Number | MBDLN25SE |
Minimum Order Quantity | 1 Piece |
Brand | YASKAWA |
Model Name/Number | GA500 |
Input Voltage | 200-480 |
Input Phase | 1 - Phase |
Input Frequency | 50 - 60 |
Output Current | 0.8 - 82 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
Minimum Order Quantity | 1 Piece |
Model Name/Number | R1000 |
Brand | YASKAWA |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 10 - 629 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
The R1000 is a power regenerative unit with both braking and regenerative functions. The R1000 shows great energy-saving performance in combination with an inverter. The R1000 will dramatically affect applications with large regenerative loads such as cranes and elevators.Because the R1000 does not require a braking resistor unit, it requires less space and enhances braking ability.
FeaturesMinimum Order Quantity | 1 Piece |
Brand | Schneider |
Torque | 2 |
Output Power | 0.95 kW |
Output Current | 2 A at 4 kHz |
Input Voltage | 24 V DC |
Input Phase | 3 - Phase |
Model Name/Number | LXM62DU60D21000 |
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M100 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 30 V DC |
Communication Port | USB |
Usage/Application | PLC |
Modicon Easy M100 are part of the Easy line, the essential automation & control products from a worldwide leader.
When just enough is just right!Fit for purpose products
Easiness
Robustness
Availability
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | TM200 |
I/O Points | 24 |
Output Type | Digital |
Pulse Transmission Output | 24 |
Communication Port | 3 |
Usage/Application | PLC |
Modicon Easy M200 logic controllers are part of the Easy line, the essential automation & control products from a worldwide leader.
When just enough is just right!Fit for purpose products
Easiness
Robustness
Availability
Introducing the Easy line, the essential automation & control products from a worldwide leader in automation.
Modicon Easy M200 logic controllers are entry-level products that are perfectly tailored to meet the specific requirements of emerging markets.
In other words, they answer to the following challenges: fit for purpose at affordable price with no compromise on easiness, robustness, availability and services.
Modicon Easy M200 logic controllers have been specifically designed for:
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M200 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 30 V DC |
Communication Port | USB,MICRO SD |
Usage/Application | PLC |
Number of Inputs | 9 Digits |
Modicon Easy M200 logic controllers are part of the Easy line, the essential automation & control products from a worldwide leader.
When just enough is just right!Fit for purpose products
Easiness
Robustness
Availability
Introducing the Easy line, the essential automation & control products from a worldwide leader in automation.
Modicon Easy M200 logic controllers are entry-level products that are perfectly tailored to meet the specific requirements of emerging markets.
In other words, they answer to the following challenges: fit for purpose at affordable price with no compromise on easiness, robustness, availability and services.
Modicon Easy M200 logic controllers have been specifically designed for:
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M251 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 30 V DC |
Communication Port | DHCP Client,Modbus,Ethernet |
Usage/Application | PLC |
Modicon M251 logic controller- your choice for modular and distributed architectures, that connect everything!
The Modicon M251 with CANopen or Modbus TCP let you easily connect to SCADA, MES, ERP by standard Ethernet cables and even via Wi-Fi. Boost your machine’s performance with data transfer via SD Card, embedded web server and more. Get unlimited access to your machine via Ethernet - everywhere and any time and simplify maintenance with any mobile device through visualization pages designed directly inside SoMachine and stored in the PLC’s web server.
The Modicon M251 logic controller is a MachineStruxure controller. The NEXT generation of MachineStruxure™ from Schneider Electric is an intuitive solution for machine automation with all the features and functions you need to build machines that will improve your bottom line. From design and development, to commissioning and maintenance, MachineStruxure is a complete machine building solution with benefits all through the machine life cycle.
Models & Ratings
TM251MESC
TM251MESE
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M221 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 0.52 A 5 V For Expansion Bus |
Communication Port | DHCP Client,Modbus,Ethernet |
Usage/Application | PLC |
Modicon M221 logic controller: the best performance for its size!
The Modicon M221 logic controller offers best-in-class performance. Available also in book format, it requires minimal installation and offers tremendous versatility. Connect a simple remote operator panel for instant maintenance and machine visualization.
The Modicon M221 logic controller is a MachineStruxure controller. The NEXT generation of MachineStruxure™ from Schneider Electric is an intuitive solution for machine automation with all the features and functions you need to build machines that will improve your bottom line. From design and development, to commissioning and maintenance, MachineStruxure is a complete machine building solution with benefits all through the machine life cycle..
TM221CE40T
TM221CE40U
TM221CE24R
TM221CE40R
TM221CE16R
TM221CE24T
TM221C40R
TM221C40T
TM221CE16T
TM221C24R
TM221C24T
TM221C16R
TM221C16T
TM221C16U
TM221C40U
TM221CE16U
TM221CE24U
TM221C24U
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M241 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 30 V DC |
Communication Port | DHCP Client,Modbus,Ethernet |
Usage/Application | PLC |
Models & Ratings
TM241CE40T
TM241CE24T
TM241CE40U
TM241CE40R
TM241CEC24U
TM241C24R
TM241C40T
TM241CE24R
TM241CE24U
TM241CEC24R
TM241C24T
TM241C40R
TM241C40U
TM241C24U
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Usage/Application | Autoation |
Power | 750W |
Type | Copper Motor |
Voltage | 2.4 |
Model Name/Number | BCH2LF0733CA5C |
Speed | 3000 Rpm |
Input Phase | Three Phase |
Increase profitability
Improve efficiency
Simplify integration & maintenance,
Intuitive commissioning & programming
SoMachine® is the universal programming software for machines automated by MachineStruxure controllers. Simple navigation that requires only fewer clicks delivers a more efficient engineering process. All programming, visualization, and commissioning are handled in just one intuitive tool that is available as a free download. In addition to SoMachine the SoMove setupsoftware can be used for the commissioning of Lexium 28. This could be done in just the same way as it is on other Schneider Electric drives and starters, to configure, adjust, debug, and maintain the drive.
The Lexium servo drives and servo motors are part of MachineStruxure. The NEXT generation of MachineStruxure™ from Schneider Electric is an intuitive solution for machine automation with all the features and functions you need to build machines that will improve your bottom line. From design and development, to commissioning and maintenance, MachineStruxure is a complete machine building solution with benefits all through the machine life cycle.
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Torque | 2 |
Output Power | 1000 W at 220 V |
Output Current | 750 W at 220 V |
Input Voltage | 220 V (- 10...15 %) for three phase,220 V (- 20...15 %) for single phase |
Input Phase | 3 - Phase |
Model Name/Number | LXM23AU10M3X |
Increase profitability
Improve efficiency
Simplify integration & maintenance,
Intuitive commissioning & programming
SoMachine® is the universal programming software for machines automated by MachineStruxure controllers. Simple navigation that requires only fewer clicks delivers a more efficient engineering process. All programming, visualization, and commissioning are handled in just one intuitive tool that is available as a free download. In addition to SoMachine the SoMove setupsoftware can be used for the commissioning of Lexium 28. This could be done in just the same way as it is on other Schneider Electric drives and starters, to configure, adjust, debug, and maintain the drive.
The Lexium servo drives and servo motors are part of MachineStruxure. The NEXT generation of MachineStruxure™ from Schneider Electric is an intuitive solution for machine automation with all the features and functions you need to build machines that will improve your bottom line. From design and development, to commissioning and maintenance, MachineStruxure is a complete machine building solution with benefits all through the machine life cycle.
Minimum Order Quantity | 1 Piece |
Brand | SCHNEIDER |
Usage/Application | SERVO |
Power | THREE PHASE |
Type | Copper Motor |
Voltage | 2.4V |
Model Name/Number | BMH1002P32A2A |
Speed | 2000RPM |
For the Leading Edge
Superior performance and compact design
Simplified engineering, installation and commissioning
Open for the world of motion
Integrated safety
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Usage/Application | Servo |
Power | 1KW |
Voltage | 2.5 |
Model Name/Number | SH30553P11A2000 |
Speed | 9000RPM |
Input Phase | Three Phase |
Motor Type | AC |
In a conventional stand-alone design with integrated 3-phase power supply, Lexium 52 series servo drives are particularly well suited for economical configuration of servo drive solutions with self-contained single axes. The drives communicate via Sercos with the PacDrive 3 controller and offer embedded digital I/O. They are available in five different power levels, ranging from 1.5 to 24 A continuous current and 6 to 72 A peak current.
Lexium 52 stand alone servo drives can be controlled with all PacDrive LMC motion controllers of the Eco and Pro/Pro 2 Eco series. They match in particular with the smaller PacDrive LMC Eco controllers, when only few servo axes are required. Lexium 52 servo drives are all equipped with electronic name plates, so the controller recognizes the drives and configures them automatically.
Dynamic, highly efficient servo motors form the basis for servo solutions with Lexium 52. The Lexium SH3, MH3, and the SHS stainless steel servo motors cover a wide range of performance and flange sizes. All motors are equipped with electronic name plates, which is making them an integral component of the PacDrive 3 automation system, too.
The Lexium 52 servo drive offer increases machine performance due to the following characteristics :
• Power ratings between 0.4 and 7 kW (0.536 and 9.383 hp)
• Overload capacity: high peak current (up to 4 times the continuous current)
• Increases the range of movement
• Power density: the compact size of the servo drives offers maximum efficiency in a small space
• Compliance with electromagnetic compatibility (EMC) requirements
Hardwired invert enable safety input (STO), internal braking resistor and internal EMC-filter are making Lexium 52 a ready-to-use-solution. With an option concept an individual drive solutions can be created :
• External braking resistors, when the servo motor has to be braked frequently
• Additional EMC input filters to reduce conducted emissions on the line supply below the limits of standard IEC/EN 61800-3 edition 2, category C2 or C3.
• Line chokes for improved protection against overvoltages/ to reduce harmonic distortion of the current
Minimum Order Quantity | 1 Piece |
Brand | YASKAWA |
Output Power | 1.5 - 110 KW |
Output Current | 8 - 415 |
Input Voltage | 200 - 415 |
Input Phase | Three Phase |
Model Name/Number | L1000A |
Frequency | 50 - 60 |
Features
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Usage/Application | Servo Motor |
Voltage | 2.4V |
Model Name/Number | BCH0802O12A1C |
Speed | 3000RPM |
Input Phase | Three Phase |
Motor Type | AC |
Easy integration
The Lexium 23 Plus servo drives have numerous functions such as speed and torque control, auto-tuning, and positioning.
An open communication concept enables simple integration into a wide range of different control system architectures.
Simple commissioning and lower installation costs
The Lexium 23 CT PC commissioning software has an auto-tuning function which enables an extremely fast startup.
The simplicity of the wiring of the servo drives simplifies installation and reduces global installation costs.
Compact range
The compact size of the servo drives makes it ideal for use where space is limited.
Flexibility
Depending on the model, the servo drives feature standard digital and analog I/O and one of the following communication interfaces:
Suitable for a very wide variety of applications thanks to the four levels of inertia offered: ultra low, low, medium, and high.
High-performance servo drive dedicated to simple machine applications
The Lexium 23 Plus servo range is all you need to optimize your motion control the efficient way.Combined with the powerful BCH servo motor, the Lexium 23 Plus servo drive will enhance your installation through added efficiency and flexibility. Depending on your installation, a range of options to further maximise your performance is available as well.
The compact size of the range makes it ideal for use where space is limited and helps you reduce the size of your machine, all while you reduce the costs of your global installation.
ApplicationsMinimum Order Quantity | 1 Piece |
Model Name/Number | D1000 |
Brand | YASKAWA |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 18 - 1040 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 Months |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
Features
Minimum Order Quantity | 1 Piece |
Brand | YASKAWA |
Model Name/Number | V1000 |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 0.8 - 69 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP66 |
Enclosure Rating | IP66 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
Features
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Torque | 2 |
Output Power | 7 kW |
Output Current | 13 A |
Input Voltage | 24 V DC |
Input Phase | 1 - Phase |
Model Name/Number | LXM52DD72C41000 |
In a conventional stand-alone design with integrated 3-phase power supply, Lexium 52 series servo drives are particularly well suited for economical configuration of servo drive solutions with self-contained single axes. The drives communicate via Sercos with the PacDrive 3 controller and offer embedded digital I/O. They are available in five different power levels, ranging from 1.5 to 24 A continuous current and 6 to 72 A peak current.
Lexium 52 stand alone servo drives can be controlled with all PacDrive LMC motion controllers of the Eco and Pro/Pro 2 Eco series. They match in particular with the smaller PacDrive LMC Eco controllers, when only few servo axes are required. Lexium 52 servo drives are all equipped with electronic name plates, so the controller recognizes the drives and configures them automatically.
Dynamic, highly efficient servo motors form the basis for servo solutions with Lexium 52. The Lexium SH3, MH3, and the SHS stainless steel servo motors cover a wide range of performance and flange sizes. All motors are equipped with electronic name plates, which is making them an integral component of the PacDrive 3 automation system, too.
The Lexium 52 servo drive offer increases machine performance due to the following characteristics :
• Power ratings between 0.4 and 7 kW (0.536 and 9.383 hp)
• Overload capacity: high peak current (up to 4 times the continuous current)
• Increases the range of movement
• Power density: the compact size of the servo drives offers maximum efficiency in a small space
• Compliance with electromagnetic compatibility (EMC) requirements
Hardwired invert enable safety input (STO), internal braking resistor and internal EMC-filter are making Lexium 52 a ready-to-use-solution. With an option concept an individual drive solutions can be created :
• External braking resistors, when the servo motor has to be braked frequently
• Additional EMC input filters to reduce conducted emissions on the line supply below the limits of standard IEC/EN 61800-3 edition 2, category C2 or C3.
• Line chokes for improved protection against overvoltages/ to reduce harmonic distortion of the current
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Torque | 2 |
Output Power | 7.3A |
Output Current | 1000 W at 220 V |
Input Voltage | 12...24 V DC |
Input Phase | 3 - Phase |
Model Name/Number | LXM23DU10M3X |
Easy integration
The Lexium 23 Plus servo drives have numerous functions such as speed and torque control, auto-tuning, and positioning.
An open communication concept enables simple integration into a wide range of different control system architectures.
Simple commissioning and lower installation costs
The Lexium 23 CT PC commissioning software has an auto-tuning function which enables an extremely fast startup.
The simplicity of the wiring of the servo drives simplifies installation and reduces global installation costs.
Compact range
The compact size of the servo drives makes it ideal for use where space is limited.
Flexibility
Depending on the model, the servo drives feature standard digital and analog I/O and one of the following communication interfaces:
Suitable for a very wide variety of applications thanks to the four levels of inertia offered: ultra low, low, medium, and high.
High-performance servo drive dedicated to simple machine applications
The Lexium 23 Plus servo range is all you need to optimize your motion control the efficient way.Combined with the powerful BCH servo motor, the Lexium 23 Plus servo drive will enhance your installation through added efficiency and flexibility. Depending on your installation, a range of options to further maximise your performance is available as well.
The compact size of the range makes it ideal for use where space is limited and helps you reduce the size of your machine, all while you reduce the costs of your global installation.
ApplicationsMinimum Order Quantity | 1 Piece |
Brand | Schneider |
Torque | 2 |
Output Power | 4.5 A at 16 kHz |
Output Current | 750 W at 220 V |
Input Voltage | 220 V (- 10...15 %) for three phase,220 V (- 20...15 %) for single phase |
Input Phase | 3 - Phase |
Model Name/Number | LXM26DU07M3X |
Easy Lexium 26, servo drives and servo motors, are part of the Easy Series, the essential automation & control products from a worldwide leader.
When just enough is just right!Fit for purpose products
Easiness
Robustness
Availability
Introducing the Easy Series, the essential automation & control products from a worldwide leader in automation.
Easy Lexium 26, servo drives and servo motors, are entry-level products that are perfectly tailored to meet the specific requirements of emerging markets. In other words, they answer to the following challenges: fit for purpose at affordable price with no compromise on easiness, robustness, availability and services.
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Output Power | 5 A at 8 kHz,6 A at 4 kHz |
Output Current | 1.4 kW at 4 kHz |
Input Voltage | 380...480 V - 15...10 % |
Input Phase | 3 - Phase |
Model Name/Number | LXM05AD14N4 |
Minimum Order Quantity | 1 Piece |
Motor Power | 7 HP |
Power | 7 HP |
Model Name/Number | ATV310HD15N4E |
Input Phase | 3 - Phase |
Minimum Order Quantity | 1 Piece |
Mounting Type | DIN Rail |
Brand | Schneider |
Manufacturer Series | TM172 |
I/O Points | 42 |
Output Type | Digital |
Pulse Transmission Output | 24 |
Communication Port | Ethernet |
Ambient Air Temperature For Operation | 265 |
Exct Time for Event Task | 34Q |
Ambient Air Temperature For Storage | 365 |
Minimum Order Quantity | 1 Piece |
Brand | YASKAWA |
Model Name/Number | A1000 |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 3.2 - 1090 |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
The A1000 is the premium inverter from YASKAWA.It provides great operation reliability, environmental benefits and energy savings as well as many other user oriented
Minimum Order Quantity | 1 Piece |
Model Name/Number | G7 |
Brand | YASKAWA |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 3.2 - 605 |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
Features
Minimum Order Quantity | 1 Piece |
Model Name/Number | GA700 |
Brand | YASKAWA |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 3.2 - 675 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
Models & Ratings
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Manufacturer Series | M262 |
I/O Points | 40 |
Output Type | Transistor |
Pulse Transmission Output | 30 V DC |
Communication Port | DHCP Client,Modbus,Ethernet |
Usage/Application | PLC |
Minimum Order Quantity | 1 Piece |
Model Name/Number | HV600 |
Brand | YASKAWA |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 Months |
Degree of Protection | IP20 |
Enclosure Rating | IP66 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
The HV600 keypad has all the features you need intuitivelyat your fingertips, its simplicity is what makes it the fastestin the industry to commission.
Minimum Order Quantity | 1 Piece |
Model Name/Number | J1000 |
Brand | YASKAWA |
Input Voltage | 200-480 |
Input Phase | 1 - Phase |
Input Frequency | 50 - 60 |
Output Current | 0.8 - 19.6 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
The J1000 meets all automation requirements for compact applications with variable speed operation and energy saving characteristics. A wide range of useful functions upgrade your machine and offer great potentials
FeaturesMinimum Order Quantity | 1 Piece |
Brand | YASKAWA |
Model Name/Number | U1000 |
Input Voltage | 200-480 |
Input Phase | 3 - Phase |
Input Frequency | 50 - 60 |
Output Current | 22 - 930 |
Start Up Torque | Heavy Duty |
Control Procedure | Local- Remote |
Ambient Temp. | 50 |
Installation Type | Panel Mount |
Acceleration Time | 0 - 200 |
Warranty | 12 |
Degree of Protection | IP20 |
Enclosure Rating | IP20 |
Communication Ports | CC-Link, MECHATROLINK, DeviceNet, PROFIBUS-DP, CANopen, EtherCAT, Modbus TCP/IP |
Features
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Torque | 2 |
Output Power | 4.5 A at 16 kHz |
Output Current | 1.4 kW at 4 kHz |
Input Voltage | 24 V DC |
Input Phase | 3 - Phase |
Model Name/Number | ILA1F571PB1A0 |
Lexium Integrated Drive ILA
Lexium Integrated Drive ILE
Lexium Integrated Drive ILS
Compact design
Open Communication
Integrated safety
Easy Installation and Commissioning
Decentralised motion solutions with integrated drives
Lexium Integrated Drives integrate motor, positioning controller, power electronics, fieldbus and safety function in a single device. Each motor technology offers a wide range of applications for decentralised motion solutions.
ApplicationsMinimum Order Quantity | 1 Piece |
Motor Power | 3 HP |
Power | 3 HP |
Usage | for Industrial Machinery |
Brand | Schneider |
Model Name/Number | ATV310HD22N4EF |
Input Voltage | 240V |
Input Phase | 3 - Phase |
Input Frequency | 380...460 V |
Output Current | 22KW |
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Model Name/Number | HMIGXU3512 |
Display Size | 7'' |
Type of Communication | 9 Pin Male |
Port Type | 2 Serial Ports, 1 Ethernet Port |
Phase | Three phase |
Magelis Easy GXU, Essential touch screen panels, are part of the Easy line, the essential automation & control products from a worldwide leader.
When just enough is just right!
Fit for purpose products
Easiness:
Robustness
Availability
Introducing the Easy line, the essential automation & control products from a worldwide leader in automation.
Magelis Easy GXU, Essential touch screen panels, are entry-level products that are perfectly tailored to meet the specific requirements of emerging markets. In other words, they answer to the following challenges: fit for purpose at affordable price with no compromise on easiness, robustness, availability and services.
Industry:
Applications:
Minimum Order Quantity | 1 Piece |
Model Name/Number | HMIGTO6315 |
Brand | Schneider |
Display Size | 12.1'' |
Type of Communication | USB 2.0 Type Mini B |
Port Type | Ethernet |
Usage/Application | 96MB |
Mounting Type | Panel Mount |
Operating System | Windows 7 |
Phase | Three phase |
Minimum Order Quantity | 1 Piece |
Brand | Schneider |
Output Power | 72 A for 5 s |
Output Current | 24 A at 8 kHz |
Input Voltage | 200...240 V - 15...10 %,380...480 V - 15...10 % |
Input Phase | 3 - Phase |
Model Name/Number | LXM32SD72N4 |
For the Leading Edge
Superior performance and compact design
Simplified engineering, installation and commissioning
Open for the world of motion
Integrated safety
ApplicationsInspired by Simplicity!